Archives

A plug-in ionization smoke detector. SK-ION incorporates a unique single source, dual chamber design to respond quickly to a broad range of fires. 6” base [...]

Adds 10 Class B zone inputs to the SK5208 FACP. Two SK-5217 expanders can be used with the SK-5208 for a total of 30 zones. The SK-5217 can be installed in the SK-5208 cabinet or [...]

The Model 5230 Remote Alphanumeric Annunciator can be used to program models 5104, 5204, 5207 and C6000 controls. Programming options include telephone numbers, reporting format, [...]

The Model 5230 Remote Alphanumeric Annunciator can be used to program models 5104, 5204, 5207 and C6000 controls. Programming options include telephone numbers, reporting format, [...]

This is a photoelectric smoke detector that is compatible with the following Simplex bases, 2098-9525, 2098-9526, 2098,9527, 2098-9528, 2098-9529.

This is a photoelectric smoke detector that is compatible with the following Simplex bases, 2098-9525, 2098-9526, 2098,9527, 2098-9528, 2098-9529.

Many recalled units will have the TruSense logo or “AMBER=FAULT” printed on the front, according to Kidde’s website. BIG RECALL NEWS!! Kidde is recalling about 226,000 smoke [...]

The Siemens ─ Fire Safety HTRI-series Intelligent interface modules are designed to provide the means of interfacing direct shorting devices to the fire-alarm control panel (FACP) [...]

The Siemens ─ Fire Safety HTRI-series Intelligent interface modules are designed to provide the means of interfacing direct shorting devices to the fire-alarm control panel (FACP) [...]

The Siemens ─ Fire Safety HTRI-series Intelligent interface modules are designed to provide the means of interfacing direct shorting devices to the fire-alarm control panel (FACP) [...]

This stop-start cycle impacted the industry throughout the supply chain. A manufacturing backlog built up that even today has not caught up with demand. The impact of COVID-19 has spared no [...]

The Siemens HFP-11 has been discontinued by Siemens. We have a limited stock of new sealed factory box devices, so stock up while you can. The HFP-11 smoke detector is a plug-in, [...]

As standard operations and the pace of production starts to revert to normal, both employers and employees must consider the possibility of physical deconditioning. Manufacturing jobs are often [...]

The Gamewell-FCI ASD-PL2F Photoelectric Smoke Detector Head is a replacement photoelectric smoke detector head for use in Gamewell-FCI addressable panels. These analog addressable [...]

There is NO replacement detector for the FP-11 The end of an era is upon us. The MXL fire safety system is officially being discontinued as of May 29, 2020. While final FP-11 smoke detector [...]

In early April, we received notification that major fire alarm manufacturers who build and assemble their products in Mexico have been shut down by the government due to COVID-19 exposure in [...]

This cover is the perfect solution for protecting smoke and heat detectors from dust and debris during construction building, renovation, or decorating work. Simply place cover [...]

 Currently, this device is only compatible with the Signature Loop Controller, but it can be customized with a variety of accessories and [...]

SIGA-PS compares the information to historical readings and time patterns to make an alarm decision.

The power of fire should not be underestimated. In 2017, one home fire occurred every 88 seconds in the United States, and about half of the insurance claims relating to fire were made by [...]

The NEW Siemens Pyrotronics FP-11 is an intelligent (addressable) photoelectric smoke detector. Siemens discontinued new production of this part in December of 2019. The Siemens [...]

The fire alarm system industry is at the brink of a black swan event. The impact this will have on the availability and cost of legacy smoke alarm and detector products is something rarely seen [...]

Smoke detectors have two critical functions, to warn people of a potential fire hazard and to save lives. To be effective, smoke detectors need to be installed correctly and detect smoke from [...]

Back then, it was common to use bells to signal an alarm. As technology changed, it was found that the bells emitted too much electrical noise back into the system and it caused problems with [...]

On December 5th, 2019, UL decided to extend the UL 217 & 268 smoke detector standards compliance date from May 2020 until June 2021. Read what this means to you, your fire safety system, and [...]

"The DMP 1164 Smoke Detector is a wireless device with integrated synchronized sounder. In installations with multiple smoke detectors, when one 1164 sounds, it signals the panel to [...]

New Siemens ZU-35DS dual zone monitoring card designed to provide two independent initiating circuits. In a addition to all the features of the ZU-35, the DS also provides the [...]

New Siemens ZU-35DS dual zone monitoring card designed to provide two independent initiating circuits. In a addition to all the features of the ZU-35, the DS also provides the [...]

New factory sealed, never open Siemens CP-2ER control panel. Special hazard releasing panel.

New factory sealed, never open Siemens PMI. The Person Machine Interface (PMI) is the primary user interface and processor for the XLS FireFinder fire alarm control panel (FACP). [...]

System Sensor 2251 is a plug-in type smoke sensor that combines a photoelectronic sensing chamber with addressable-analog communications. The sensor transmits an analog [...]

New Johnson Controls 2951J photoelectric smoke detector. Smoke detectors are new in the original factory box. Johnson Controls intelligent plug-in smoke detectors with integral [...]